| View previous topic :: View next topic |
| Author |
Message |
cykotix
|
 Posted: Sat Mar 25, 2006 8:49 am Post subject: GameCreate and FreeBSD 6.x |
 |
|
First off, in order to get the gamecreate.x86 to work I had to execute the following command:
| Quote: | | brandelf -t Linux gamecreate.x86 |
After doing this, you are able to execute the binary.
That said, I am able to execute the binary but unable to actually run gamecreate. Running the program in the foreground, it seems to be trying to change directories (where I have no clue) and that is what is causing the failure.
| Quote: | ==GAMECREATE CLIENT 5.1.1 STARTUP==
LOG: Fri Mar 24 17:38:13 2006: Starting GameCreate Client
LOG: Fri Mar 24 17:38:13 2006: Hostname: my.vhost.com. IP: 63.xxx.xxx.xxx.
LOG: Fri Mar 24 17:38:13 2006: Master: us1.master.gamecreate.com,us2.master.gamecreate.com
LOG: Fri Mar 24 17:38:13 2006: Starting FTP server thread
LOG: Fri Mar 24 17:38:13 2006: SSL pipe not connected, attempting to connect
LOG: Fri Mar 24 17:38:13 2006: Master address(es): us1.master.gamecreate.com,us2.master.gamecreate.com
LOG: Fri Mar 24 17:38:13 2006: chdir() failed: (Error: 2)
CHECK: PID 0 result -1 from 38916
CHECK: PID 0 result -1 from 38916
CHECK: PID 0 result -1 from 38916
CHECK: PID 0 result -1 from 38916
CHECK: PID 0 result -1 from 38916
Terminated
|
I've browsed through the limited posts in this support forums along with what is currently available in the Manual link to the left and have come up with nothing. At this point, without more verbose logging features, I'm just guessing at what this binary is trying to do.
In addition, I do run a httpd and a ftpd on the same IP that gamecreate is attempting to use. I've stopped both daemons and tried starting up the binary and the same result persists.
Any help would be appreciate. Thank you. |
|
| Back to top |
|
 |
adbot
|
| Posted: Thu Mar 31, 2011 3:57 am |
|
|
|
|
|
|
|
Andrew
Mammoth
|
| Posted: Sat Mar 25, 2006 11:23 am Post subject: |
|
|
Hey,
I'll try and help you as best I can, someone else who wrote the actual GameCreate Client would have a better idea than me - ill link him to this thread.
Its possibly changing directory because its attempting to start a server.
The 'Terminated' log entry, is that because you simply terminated the console yourself, or was that a form of crash?
Are you attempting to start a server via the website? |
|
| Back to top |
|
|
Guest
|
| Posted: Tue Mar 28, 2006 3:04 am Post subject: |
|
|
I apologize from the late response.
This output above is simply from running the command:
./gamecreate.x86 -f
via console on a FreeBSD 6.1-PRERELEASE |
|
| Back to top |
|
|
cykotix
|
| Posted: Tue Mar 28, 2006 3:08 am Post subject: |
|
|
| Sorry, didn't realize I wasn't signed in. The above "Guest" is me. |
|
| Back to top |
|
|
Andrew
Mammoth
|
| Posted: Tue Mar 28, 2006 8:25 am Post subject: |
|
|
Hey,
What exactally is the problem, does the client not start a game server you have setup via GameCreate Admin?
Which game server are you attempting to start from your domain, whats the error if you watch the console output? |
|
| Back to top |
|
|
cykotix
|
| Posted: Wed Mar 29, 2006 3:40 am Post subject: |
|
|
| I'm simply trying to start the client. I get as far as the first post above and that's it. I have subscribed with gamecreate. I have my domain login, user login and the passwords for both. The domain I created appears in the list on the site. However, when I login, it claims that I have no hosts setup. This is likely due to the fact that the client refuses to run in a fbsd environment. |
|
| Back to top |
|
|
cykotix
|
| Posted: Wed Mar 29, 2006 3:45 am Post subject: |
|
|
I'd also like to add that upon logging into the website, it is prompting me to setup a new host. The instructions it gives are as follows:
| Quote: |
Step 1
Download the GameCreate Client from the GameCreate Client download website.
Step 2
Install the GameCreate Client on the new host.
Enter the domain login information when prompted:
Domain Login: <my_domain_login>
Domain Password: <my_domain_password>
This information can be found on the Domain Configuration page.
Step 3
The GameCreate Client will attempt to login to the specified domain, and the new host should appear shortly after under the Hosts tab.
Further configuration of the host may be performed by visiting the new hosts Configuration tab. |
It is upon doing this step that I am getting the error in the original post. That is not terminal terminated. It simply crashes after being started with `./gamecreate.x86 -f` so I can see what is going on in the foreground. |
|
| Back to top |
|
|
Andrew
Mammoth
|
| Posted: Wed Mar 29, 2006 6:28 am Post subject: |
|
|
Ah I see, thanks.
Will see what we can do to make it work - Will get back to you. |
|
| Back to top |
|
|
Nathan
Mammoth
|
| Posted: Thu Mar 30, 2006 2:56 pm Post subject: |
|
|
| I'll install FreeBSD and check it out. |
|
| Back to top |
|
|
cykotix
|
| Posted: Fri Apr 07, 2006 1:20 am Post subject: |
|
|
| Any luck with this? Still haven't heard anything. |
|
| Back to top |
|
|
Nathan
Mammoth
|
|
| Back to top |
|
|
Omar
|
| Posted: Fri Apr 07, 2006 10:23 am Post subject: |
|
|
Hope it works.
You guys are really fast at resolving issues like this  |
|
| Back to top |
|
|
|
Navigation Menu
Customers 
Other Links 
Register
Log in
Search
